The design intent from the beginning was to offer an Australian, quality built, high pressure pump that has all of the performance and safety features required by the modern contractor whilst being efficient, simple to operate and easy to maintain. The Metco range of machines fulfils that design brief with the solid performance and flexibility to optimise productivity hour after hour, day after day.

Metco high-pressure pumps utilise the Jetstream UNx range of fluid ends which outclass rivals for ease of service and quick change fluid ends, available in 15K, 20K & 40K PSI (1034, 1379 & 2757 bar).

Safety

  • Built to comply with Australian Standards
  • Controller and remote E Stop for immediate shut down in case of emergency
  • Dual rupture disc assemblies
  • All moving parts fully guarded
  • Insulated exhaust system
  • Lock out isolators
  • Multiple tie-down points for transport
  • Fork-lift pockets

Operation

  • Fluid end conversion 15K, 20K and 40K PSI (1034, 1378 & 2757 bar)
  • Ease of service and fluid end changeover means less down-time
  • Comprehensive shutdown systems – low water; low fuel; dirty water filter; engine fail; out of level (pump)

 

General

  • 8mm wall section hot dip galvanised and bunded base to prevent spillage to ground
  • Optional roof
  • Able to be supplied fully enclosed in an insulated shipping container

A150

  • Jetstream 3000 pressure pump available in 15K, 20K and 40k PSI.
  • Cummins fuel efficient QSB 150hp low emission Tier 3 Diesel engine.
  • 50 degree H/duty (high trash) cooling package.
  • Hot dipped fully galvanised high strength low vibration chassis.
  • Optional single point lift frame with side accessible chain ring.
  • Reliable soft coupling specifically designed for the 150hp powertrain.
  • High volume 250 Litre fuel tank mounted in steel tray.
  • Heat wrapped exhaust system and turbo.
  • Plunger cooling water recovery system.
  • Soft mount system (optional) for truck mounts.
  • High or low mounting system for control panel.
  • Engine rotation tool to facilitate pump packing servicing.
  • 130L HDPE UV resistant 10 mm wall water tank.
  • Reliable electronic water level monitoring system.
  • Heavy duty stainless steel filter housings
  • Pressure gauges before and after filters.
  • Plumbing and valves in SS or brass.
  • Large SOP sign mounted on tank face.
  • EMT3 Control System with can bus engine monitoring.
  • Pump tilt monitoring.
  • Pump oil level protection.
  • Water level and pressure protection.
  • Remote E/stop.
  • Optional work lamps.

A325

  • Wireless and hard wired remote control systems available
  • Jetstream 4200 pressure pump available in 15K, 20K and 40k PSI.
  • Cummins fuel efficient QSL 325hp low emission 9L Tier 3 Diesel engine.
  • 50 degree H/duty (high trash) cooling package.
  • Heat wrapped exhaust system and turbo.
  • Soft mount system (optional) for truck mount.
  • Fits many 10' (container designs vary) and all 20' containers.
  • Hot dipped fully galvanised high strength low vibration chassis.
  • Optional single point lift frame with side accessible chain ring.
  • Super heavy duty auto clutch with reliable soft coupling.
  • Heavy duty, reliable, high inertia timing drive system.
  • 550L (internal volume) fuel tank with bunding.
  • High flow fuel breather system for fast fill fuel transfer
  • 750lpm Stainless steel bag filter housing
  • 30” Stainless steel cartridge style polishing filter (40,000 psi fluid end only)
  • Hot dipped fully galvanised high strength low vibration chassis.
  • Optional work lamps.
  • Remote E/stop and pump start/stop buttons.

A600

  • Wireless and hard wired remote control systems available
  • Jetstream 6000 pressure pump available in 15K and 20KPSI
  • Volvo 700hp diesel engine with highly elastic coupling and automatic clutch
  • Hot dipped fully galvanised high strength low vibration chassis.
  • Fork pockets provided for safe manoeuvring around job site
  • Dual 250L HDPE UV resistant 10mm wall water tanks.
  • 50 degree H/duty (high trash) cooling package.
  • Soft mount system (optional) for truck mount.
  • Pump has an extremely robust power end with pressure feed oiler system.
  • The pump control unit monitors engine and pump operating parameters with an extensive engine and pump fault code display Including feed pressure and level alarms
  • Manual pump rotation system to facilitate pump packing servicing
  • Option to containerise unit into 20’ high cube container with ‘soft mount’ system to reduce torsional vibration
  • The control unit features two low idle speed settings: (1) “Safety idle” 650RPM, the clutch is disengaged and pump stopped. (2) “Pump Start 1150 RPM, the clutch is now engaged and pump running
  • Inlet supply water is throttled with a high flow industrial solenoid valve.
  • Water level is monitored electronically to ensure consistent operating level with a low-level alarm
  • Dual H/duty stainless steel bag filters plumbed in parallel.
  • Fluid end flow/pressure is controlled with an adjustable pilot controlled regulator to set the desired operating pressure through a Kamat 1500 Bar 400LPM regulator valve
  • High pressure discharge flow may also be remotely controlled with the optional ‘Electric Foot Pedal’ controller.
  • 1200L (internal volume) fuel tank with bunding provides 12hrs continuous operation.
  • Heat wrapped exhaust system and turbo.
  • Remote E/stop and pump start/stop buttons.
  • Optional work lamps.